Mounting for Roof SV20/SV30

SControl is an advanced system management suitable for temperature, moisture and time management.

When connected to the power grid, it is able to provide a regular humidified ventilation even when the sun is not shining.

The controller requires at least connection to an air collector and temperature sensor in the air collector.

The system is available in the following variants:

SControl set 1 – Control, solar sensor PT1000
.
SControl set 2 – Control, solar sensor PT1000, 12V power supply
.
SControl set 2CC – for cooling
.
SControl set 3 (for cellular systems) – Control, solar sensor PT1000, 12V power supply, combi cooler
.
SControl set 4 – Control, solar sensor PT1000, 12V power supply, 2 pcs. Combination sensor
.
SControl set 5 – Control, solar sensor PT1000, 12V power supply, 2 pcs. Combi fan, room sensor (temp.)

There are three SV7 / SV14 roof versions:

1. With complete kit for the Fiber Cement (Type1)
2. With complete mounting kit for roofs with steel, roofing felt, bitumen and Decra. (Type2)
3. With complete mounting kit for tiling with bricks, cement bricks (contains roof anchors) (Type3)

Roof mounting kit for installation on roofs. Gives the optimal angle to the sun at 50-65 °.

The kit contains the necessary components (fittings, aluflex tube 175 cm in Ø125, feeder and accessories) to attach and install the SolarVenti on a roof.

 .

 .

Regulator1 – Plastic

Type: SV Regulator unit for operation of solar cell
incl. on/off switch, regulator, and thermostat
Material: Alu eloxated Nature/Black plastic

 .